top of page
Note : Make sure you use the latest version of VIA V2.0 or use Via Web
BN006 is preloaded with via firmware and are to ready use with VIA Configurator.
FLASHING VIA FIRMWARE
1. DOWNLOAD AND INSTALL QMK TOOLBOX:
2. DOWNLOAD FIRMWARE:
3. RUN QMK TOOLBOX.
When plugged in, press the reset button on your device.
QMK Toolbox should detect a "DFU device" connected and show a message "*** DFU device connected: STM32*
Click the "Open" button at the top of the window, browse to where you saved the .hex file.
Click the "Flash" button. Messages should appear with "Success".
bottom of page